Digital Tissue Flotation bath Price – Laboratory Equipment Suppliers INDIA

Digital Tissue Floatation Bath

UNI – 133 EX

GET A QUOTE

Product Details

Every ribbon section contains a tissue specimen that has a valuable life story behind it. It is essential that whole ribbon sections are properly collected without cracking or over- expansion. Safety of up-to-date temperature controlled electronics; combined with the convenience of a slide warming table for flattening sections and a heated slide dryer…all in one compact unit

Key Features

Microprocessor based digital temperature controller.
The broad oversized rim of water bath allows convenient storage for microscopic slide.
Rounded inner corners allows it to be cleaned easily and efficiently.
Embedded heater element plate.
Temperature selectable between ambient 90˚C.
Overheating protection system.
Inner chamber is rectangular in construction & made of seamless ( Die pressed) for easy cleaning.
The jet black surface with scratch – proof coating provides better contrast to identify sections and an easy to clean surface.
LED display for programmed and temperature , display and visual indication in case of temperature exceeds above 45˚C.
High Grade Insulation.
Membrane keyboard is resistive to water and paraffin contamination and is easily cleanable.
Independent temperature control for Slide Warm & Floatation Bath.

Application Note

FAQ

Step 1: Once the device is turned on, please press the 'MENU' button once and press the '↵ ENTER' key.
Step 2: Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Press'▲' key to select option' 2-Temp Zone 1' and press '↵ ENTER' to set the temperature.
Step 3: Adjust (increase/decrease) the temperature value as required by pressing the '▲/▼' keys and press the '↵ ENTER' key to set the desired value.
Step 4: Press'← BACK' to save your settings. Zone 1 temperature has now been set as per your requirements.

Step 1: Once the device; Tissue Floatation Bath is turned on, please press the 'MENU' button once and press the '↵ ENTER' key.
Step 2: Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Press'▲' key to select option' 3-Temp Zone 2' and press '↵ENTER' to set the temperature.
Step 3: Adjust (increase/decrease) the temperature value as required by pressing the '▲/▼' keys and press the '↵ ENTER' key to set the desired value.
Step 4: Press'← BACK' to save your settings. Zone 2 temperature has now been set as per your requirements.

Step 1: Press the '← BACK' button once. Then press the'▼' button four times.
Step 2: : Press the '↵ENTER' key. You can modify the HOUR (H), MINUTE (M), DATE (D), and YEAR (Y) using the '▲/▼' keys and press the '↵ ENTER' key to set the desired time and date.
Step 3: Press '← BACK' followed by '▲' The 'CURRENT TIME/DATE' has now been set.

Step 1: Press the 'MENU' button once and press '↵ ENTER' once. To select 'MONDAY,' please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 2: : Using the '▲' button or 'MENU' button, go to option 8 and press '↵ ENTER' twice.
Step 3: Use the '▲/▼' keys to set the ON TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ENTER' to set the MINUTE.
Step 4: Use the '▲/▼' keys to set the OFF TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 5: : Then press '← BACK' to save the settings.
Step 6: Use the'▼' key to select option '1' and press '↵ ENTER.'
Step 7: To select the NEXT DAY, press' ▲/▼' keys, and press '↵ ENTER.'
Step 8: : Select option 8 and press '↵ ENTER.' To set the ON TIME, press '↵ ENTER.'
Step 9: Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 10: Press '↵ ENTER' to set the OFF TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 11: : Then press '←BACK' to save the settings.
This is how you can set the ON/OFF TIME for 7 days.

Step 1: Once the device is turned on, please press the 'MENU' button once and press ' ↵ ENTER.'
Step 2: : Use ' ▲/▼' keys to select the weekday press the '↵ENTER' key. Using the 'ARROW UP' key, select option '4' and press '↵ENTER.' The '▲/▼' keys will show the values' 0/1' on the display, respectively. Select '0' and press '↵ ENTER' to DISABLE Zone 1. Select '1' and press '↵ ENTER' to ENABLE Zone 1.
Step 3: Please press the '← BACK' button to save your settings.

Step 1: Once the device; Tissue Floatation Bath is turned on, please press the 'MENU' button once and press '↵ ENTER.' Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Using the 'ARROW UP' key, select option '5' and press '↵ENTER.'
Step 2: : The '▲/▼' keys will show the values' 0/1' on display, respectively. Select '0' and press '↵ ENTER' to DISABLE Zone 2. Select '1' and press '↵ ENTER' to ENABLE Zone 2.
Step 3: Please press the '← BACK' button to save your settings.

Step 1: Go to the 'MENU' and press '↵ ENTER.'
Step 2: : To select the day, please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 3: Select option 6 using the '▲' key and press '↵ ENTER.' The '▲/▼' keys will show the values' 0/1' on the display screen of Tissue Floatation Bath, respectively. Select '0' and press '↵ENTER' to DISABLE the TIMER. Select '1' and press '↵ENTER' to ENABLE the TIMER.
Step 4: Using the '▲' key, select option '9' and press '↵ENTER.'
Step 5: : Then go to 'MINUTE' and use the '▲/▼' keys to adjust it to your desired time. Press '↵ENTER.'
Step 6: Press the’←BACK' button to save your settings.

Step 1: Go to the 'MENU' and press '↵ ENTER.'
Step 2: : To select the day, please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 3: Select option 7 using the '▲' key and press '↵ ENTER.' The '▲/▼' keys will show the values' 0/1' on the display, respectively. Select '0' and press '↵ ENTER' to DISABLE the TIMER. Select '1' and press '↵ ENTER' to ENABLE the TIMER.
Step 4: Using the '▲' key, select option '10' and press '↵ ENTER.'
Step 5: : Then go to 'MINUTE' and use the '▲/▼' keys to adjust it to your desired time. Press '↵ ENTER.'
Step 6: Press the’←BACK' button to save your settings.

Step 1: Press and hold the '←BACK' button for 3 seconds, then leave it. The ON TIME will begin.

Step 1: Press and hold the '←BACK' button for 3 seconds, then leave it. The OFF TIME will begin.

Step 1: the device is turned on, the screen initially displays the temperature.
Step 2: Please press the ' ← BACK ' button once. The Time, Date, and Day will now keep running on the display.

Step 1: Once the device is turned on, the screen initially displays a temperature where Date and Time are running. To show the read temperature, please press '▲' key once, the screen will now display the desired temperature.

Step 1: Once the device is turned on, the screen initially displays Read temperature.
Step 2: Use '▲' key once to get zone 1 (water bath) Set temperature, the screen displays ‘S’ number. Here uppercase ‘S’ denotes zone 1; the number indicates the Set temperature.
Step 3: Press '▲' key second time to get zone 2 (Hot Plate) Set temperature, the screen displays ‘s’ number. Here lowercase ‘s’ denotes zone 2, the number indicates Set temperature.
Step 4: Press '▲' key third time to get back the Read Temperature, which was displayed initially on the screen of Tissue Floatation Bath.
Step 5: This process successfully lets you check the Set temperature of the device as per your requirements.

Key Features

Microprocessor based digital temperature controller.
The broad oversized rim of water bath allows convenient storage for microscopic slide.
Rounded inner corners allows it to be cleaned easily and efficiently.
Embedded heater element plate.
Temperature selectable between ambient 90˚C.
Overheating protection system.
Inner chamber is rectangular in construction & made of seamless ( Die pressed) for easy cleaning.
The jet black surface with scratch – proof coating provides better contrast to identify sections and an easy to clean surface.
LED display for programmed and temperature , display and visual indication in case of temperature exceeds above 45˚C.
High Grade Insulation.
Membrane keyboard is resistive to water and paraffin contamination and is easily cleanable.
Independent temperature control for Slide Warm & Floatation Bath.

Dimension & Weight

Dimensions W x L x H (cm)	:	403 x 520 x 176
Voltage	:	220V, 50 Hz, Single Phase , A. C.

FAQ

Step 1: Once the device is turned on, please press the 'MENU' button once and press the '↵ ENTER' key.
Step 2: Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Press'▲' key to select option' 2-Temp Zone 1' and press '↵ ENTER' to set the temperature.
Step 3: Adjust (increase/decrease) the temperature value as required by pressing the '▲/▼' keys and press the '↵ ENTER' key to set the desired value.
Step 4: Press'← BACK' to save your settings. Zone 1 temperature has now been set as per your requirements.

Step 1: Once the device; Tissue Floatation Bath is turned on, please press the 'MENU' button once and press the '↵ ENTER' key.
Step 2: Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Press'▲' key to select option' 3-Temp Zone 2' and press '↵ENTER' to set the temperature.
Step 3: Adjust (increase/decrease) the temperature value as required by pressing the '▲/▼' keys and press the '↵ ENTER' key to set the desired value.
Step 4: Press'← BACK' to save your settings. Zone 2 temperature has now been set as per your requirements.

Step 1: Press the '← BACK' button once. Then press the'▼' button four times.
Step 2: : Press the '↵ENTER' key. You can modify the HOUR (H), MINUTE (M), DATE (D), and YEAR (Y) using the '▲/▼' keys and press the '↵ ENTER' key to set the desired time and date.
Step 3: Press '← BACK' followed by '▲' The 'CURRENT TIME/DATE' has now been set.

Step 1: Press the 'MENU' button once and press '↵ ENTER' once. To select 'MONDAY,' please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 2: : Using the '▲' button or 'MENU' button, go to option 8 and press '↵ ENTER' twice.
Step 3: Use the '▲/▼' keys to set the ON TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ENTER' to set the MINUTE.
Step 4: Use the '▲/▼' keys to set the OFF TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 5: : Then press '← BACK' to save the settings.
Step 6: Use the'▼' key to select option '1' and press '↵ ENTER.'
Step 7: To select the NEXT DAY, press' ▲/▼' keys, and press '↵ ENTER.'
Step 8: : Select option 8 and press '↵ ENTER.' To set the ON TIME, press '↵ ENTER.'
Step 9: Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 10: Press '↵ ENTER' to set the OFF TIMER. Adjust the HOUR (H) to your liking and press '↵ ENTER' to set the HOUR. Adjust the MINUTE(M) to your liking and press '↵ ENTER' to set the MINUTE.
Step 11: : Then press '←BACK' to save the settings.
This is how you can set the ON/OFF TIME for 7 days.

Step 1: Once the device is turned on, please press the 'MENU' button once and press ' ↵ ENTER.'
Step 2: : Use ' ▲/▼' keys to select the weekday press the '↵ENTER' key. Using the 'ARROW UP' key, select option '4' and press '↵ENTER.' The '▲/▼' keys will show the values' 0/1' on the display, respectively. Select '0' and press '↵ ENTER' to DISABLE Zone 1. Select '1' and press '↵ ENTER' to ENABLE Zone 1.
Step 3: Please press the '← BACK' button to save your settings.

Step 1: Once the device; Tissue Floatation Bath is turned on, please press the 'MENU' button once and press '↵ ENTER.' Use ' ▲/▼' keys to select the weekday press the '↵ ENTER' key. Using the 'ARROW UP' key, select option '5' and press '↵ENTER.'
Step 2: : The '▲/▼' keys will show the values' 0/1' on display, respectively. Select '0' and press '↵ ENTER' to DISABLE Zone 2. Select '1' and press '↵ ENTER' to ENABLE Zone 2.
Step 3: Please press the '← BACK' button to save your settings.

Step 1: Go to the 'MENU' and press '↵ ENTER.'
Step 2: : To select the day, please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 3: Select option 6 using the '▲' key and press '↵ ENTER.' The '▲/▼' keys will show the values' 0/1' on the display screen of Tissue Floatation Bath, respectively. Select '0' and press '↵ENTER' to DISABLE the TIMER. Select '1' and press '↵ENTER' to ENABLE the TIMER.
Step 4: Using the '▲' key, select option '9' and press '↵ENTER.'
Step 5: : Then go to 'MINUTE' and use the '▲/▼' keys to adjust it to your desired time. Press '↵ENTER.'
Step 6: Press the’←BACK' button to save your settings.

Step 1: Go to the 'MENU' and press '↵ ENTER.'
Step 2: : To select the day, please press '▲/▼' keys. After you have selected the desired day, press '↵ ENTER.'
Step 3: Select option 7 using the '▲' key and press '↵ ENTER.' The '▲/▼' keys will show the values' 0/1' on the display, respectively. Select '0' and press '↵ ENTER' to DISABLE the TIMER. Select '1' and press '↵ ENTER' to ENABLE the TIMER.
Step 4: Using the '▲' key, select option '10' and press '↵ ENTER.'
Step 5: : Then go to 'MINUTE' and use the '▲/▼' keys to adjust it to your desired time. Press '↵ ENTER.'
Step 6: Press the’←BACK' button to save your settings.

Step 1: Press and hold the '←BACK' button for 3 seconds, then leave it. The ON TIME will begin.

Step 1: Press and hold the '←BACK' button for 3 seconds, then leave it. The OFF TIME will begin.

Step 1: the device is turned on, the screen initially displays the temperature.
Step 2: Please press the ' ← BACK ' button once. The Time, Date, and Day will now keep running on the display.

Step 1: Once the device is turned on, the screen initially displays a temperature where Date and Time are running. To show the read temperature, please press '▲' key once, the screen will now display the desired temperature.

Step 1: Once the device is turned on, the screen initially displays Read temperature.
Step 2: Use '▲' key once to get zone 1 (water bath) Set temperature, the screen displays ‘S’ number. Here uppercase ‘S’ denotes zone 1; the number indicates the Set temperature.
Step 3: Press '▲' key second time to get zone 2 (Hot Plate) Set temperature, the screen displays ‘s’ number. Here lowercase ‘s’ denotes zone 2, the number indicates Set temperature.
Step 4: Press '▲' key third time to get back the Read Temperature, which was displayed initially on the screen of Tissue Floatation Bath.
Step 5: This process successfully lets you check the Set temperature of the device as per your requirements.

Accessories

Spare Parts

Application Notes

Tissue Flotation Bath

Brochures

Digital Tissue Floatation Bath

Digital Tissue Floatation Bath Russian

Digital Tissue Floatation Bath

Digital Tissue Floatation Bath

UNI – 133 EX

Product Details

Key Features

Application Note

FAQ

Key Features

Dimension & Weight

FAQ

Accessories

Spare Parts

Application Notes

Quick Links

Contact Us

Address :

Call Us :

Email :

Digital Tissue Floatation Bath

Digital Tissue Floatation Bath

UNI – 133 EX

Product Details

Key Features

Application Note

FAQ

How to Set the Zone 1 (Water Bath) Temperaturein the Tissue Floatation Bath?

How to Set the Zone 2 (Hot Plate) Temperature?

How to Set Current Time and Date in the Tissue Floatation Bath?

How to Set the On and Off Time in Tissue Floatation BathFor 7 Days?

How to Enable and Disable Zone 1 (Water Bath) in Tissue Floatation Bath?

How to Enable and Disable Zone 2 (Hot Plate)?

How to Set the Timer for Zone 1 (Water Bath) in the device Tissue Floatation Bath?

How to Set the Timer for Zone 2 (Hot Plate) in the Tissue Floatation Bath?

How to Change from OFF TIME to ON TIME?

How to Change from ON TIME to OFF TIME?

How to Run the Time, Date, Day on the Display Screen of Tissue Floatation Bath?

How to Show the Read Temperature When the Screen Displays Date and Time?

How to Check the Set Temperature When the Screen of Tissue Floatation Bath Displays Read Temperature?

Key Features

Dimension & Weight

FAQ

How to Set the Zone 1 (Water Bath) Temperaturein the Tissue Floatation Bath?

How to Set the Zone 2 (Hot Plate) Temperature?

How to Set Current Time and Date in the Tissue Floatation Bath?

How to Set the On and Off Time in Tissue Floatation BathFor 7 Days?

How to Enable and Disable Zone 1 (Water Bath) in Tissue Floatation Bath?

How to Enable and Disable Zone 2 (Hot Plate)?

How to Set the Timer for Zone 1 (Water Bath) in the device Tissue Floatation Bath?

How to Set the Timer for Zone 2 (Hot Plate) in the Tissue Floatation Bath?

How to Change from OFF TIME to ON TIME?

How to Change from ON TIME to OFF TIME?

How to Run the Time, Date, Day on the Display Screen of Tissue Floatation Bath?

How to Show the Read Temperature When the Screen Displays Date and Time?

How to Check the Set Temperature When the Screen of Tissue Floatation Bath Displays Read Temperature?

Accessories

Spare Parts

Application Notes

Related Products

Slide Staning Machine

Slide Warming Table

Tissue Embedding Station

Tissue Processor

Digital Tissue Floatation Bath

Quick Links

Contact Us

Address :

Call Us :

Email :