Home › Cryostat Microtome › Cryostat Tender Specification
Tender supportCryostat Tender Specification
A fair starting point for a cryostat microtome tender specification. Define chamber temperature, specimen-head cooling, defrost and hygiene by function so the tender stays competition-neutral. Compliance documents and a site-readiness checklist are available on request.
Request a Quote Upload Tender Talk to a Specialist Request the checklist WhatsApp
Cryostat Microtome — overview
When a surgeon is waiting, minutes matter. The UNI120 cryostat microtome delivers rapid frozen sections with a stable -35 to -40°C chamber and rapid-cooling Peltier stations that reach -65°C, so back-to-back theatre cases stay clean and reproducible. A precise motor drives chatter-free sectioning from 1–100 µm, while UV self-disinfection and a heated anti-frost glass door keep the instrument hygienic and clear — so the pathologist can guide the operating team with confidence, while the patient is still on the table. See the full cryostat page →
Technically-justified tender specification
Specify by function and capacity — not a single brand — to keep the tender fair and competition-neutral. Adjust the capacity figures to your workload.
| Parameter | Recommended minimum |
|---|---|
| Type | Cryostat microtome for frozen sectioning (rapid intra-operative & routine) |
| Chamber temperature | Adjustable down to about −20 to −35 °C (specify) |
| Specimen head | Independent specimen-head cooling colder than the chamber for quick freezing |
| Fast-freeze shelf | Multiple quick-freeze stations |
| Section thickness | Sectioning range typically ≈ 1–60 µm (specify range & steps) |
| Retraction | Specimen retraction to protect the block edge and blade |
| Defrost | Automatic and manual defrost |
| Hygiene & safety | UV / disinfection cycle, easy-clean chamber, blade guard |
| Interface | Digital temperature and thickness display with alarms |
| Documentation | User manual, IQ/OQ/PQ formats, warranty & AMC terms |
| Manufacturer | ISO 13485 QMS; Make-in-India preference where applicable |
Installation, warranty, AMC & compliance
Installation & training clause
Supply, installation and commissioning at site, with operator training and handover documentation. Site-readiness (power, space, environment, utilities) confirmed before installation.
Warranty & AMC/CMC clause
Standard warranty from date of installation, with optional AMC/CMC covering preventive maintenance, calibration support and genuine spares.
Compliance documents available (on request)
- Technical datasheet & brochure
- ISO 13485 QMS reference
- Make-in-India declaration (where applicable)
- Warranty & AMC formats
- IQ/OQ/PQ formats
Site-readiness checklist
- Stable power (stabiliser/UPS where recommended)
- Bench/floor space with service clearance
- Controlled temperature, humidity & ventilation
- Water/drainage or exhaust where required
Related: Cryostat Manufacturer in India → Cryostat Microtome Price in India → Cryostat AMC & Service →
Upload your tender or request a compliance sheet
Share your draft specification and we return a compliance sheet mapped clause-by-clause, plus a budgetary quotation. We keep specifications technically justified — never unfairly restrictive.
Practical notes from Indian histopathology labs
- In smaller diagnostic labs the daily cassette load is often modest but turnaround pressure is high — reliability and quick, repeatable runs usually matter more than maximum capacity.
- Medical colleges and teaching hospitals see batch variation and repeated use by students and rotating technicians, so robustness, simple controls and easy servicing are as important as headline specifications.
- For tender and institutional purchases, service response time and consumable/spare availability often matter as much as the specification — weigh them in the evaluation, not just the price.
- In hot and humid regions, plan reagent storage conditions and electrical protection (a stabiliser or UPS on the processor and stainer) so runs are not interrupted.
General observations from installation, service and training across Indian laboratories. Validate against your own workflow and quality system.
Related pages & guides
Frequently asked questions
Can you provide a tender specification for a cryostat?
Yes — a competition-neutral specification based on your frozen-section requirement, with compliance documents and a site-readiness checklist.
What hygiene and safety features should a cryostat tender specify?
A UV/disinfection cycle, easy-clean chamber and blade guard are standard expectations for frozen-section safety, alongside automatic and manual defrost. We include these in the recommended minimum spec.
Do you supply compliance and IQ/OQ/PQ documents?
Yes — datasheet, ISO 13485 reference, warranty/AMC formats and IQ/OQ/PQ formats on request.
Author: Unimeditrek Technical Content Team · Reviewed by: Unimeditrek Biomedical Engineering & Histopathology Applications team · Last reviewed: July 2026.
Educational and procurement guidance for histopathology laboratories. Configurations and specifications are confirmed against your requirement at the time of quotation; regulatory certificates and registration documents are issued on request per product and destination.